- Collets
- Varibore Collets
- Spring Collets
- Pull Back Collets
- ER/ESX Collets
- ER-B (ER8-B, ER11-B)
- ER-B (ER16-B)
- ER-B (ER20-B)
- ER-B (ER25-B)
- ER-B (ER32-B)
- ER-B (ER40-B)
- ER-B (ER50-B)
- ER-HP (ER11-HP, ER16-HP)
- ER-HP (ER20-HP)
- ER-HP (ER25-HP)
- ER-HP (ER32-HP)
- ER-HP (ER40-HP)
- ER-B Precision Collets Sets in Wooden Boxes (ER8B-11B-16B-20B-25B-32B-40B)
- ER-HP Precision Collets Sets in Wooden Boxes (ER11-HP-16HP-20HP-25HP-32HP-40HP)
- Circlips
- Rubber Inserts
- Expanding Collet Systems
- Collet Blocks
- Chuck Jaws
- Kitagawa
- Soft Jaws for Power Chucks
- Hard Jaws for Power Chucks
- Master Base Jaws for Power Chucks
- Pie Jaws - 1.5mm x 60° Serrated
- Pie Jaws - 3mm x 60° Serrated
- Bar Gripper Jaws for Power Chucks
- Soft Top Jaws for Scroll Chucks
- Hard Top Jaws for Scroll Chucks
- Internal Hard Jaws for Scroll Chucks
- External Hard Jaws for Scroll Chucks
- Kitagawa
- Chucks
- Kitagawa
- Indexing Chucks - Tecnomors
- TdeG - Manual & Power Chucks
- CHICK: System 5
- 0520
- 0525
- 1030
- 1040
- 1540
- 1550
- Foundations
- Indexer Subsystem
- 50mm Slide Assembly
- 100mm Slide Assembly
- 150mm Slide Assembly
- CHICK: M System
- CHICK One-Lok
- Darex Drill Sharpener
- XPS-16
- XT-3000
- XT-3000 Unit
- XT-3000 Chuck Parts
- 3 - 12mm Chuck
- 12 - 21mm Chuck
- 21 - 30mm Chuck
- 3 - 12mm Brad Point Chuck (Standard)
- 12 - 21mm Brad Point Chuck (Optional)
- 90 Degree 3 - 12mm Chuck (Standard)
- 90 Degree 12 -21mm Chuck (Optional)
- 3 - 12mm Step Drill Chuck (Standard)
- 12 - 21mm Step Drill Chuck (Optional)
- Left Hand 3 - 12mm Chuck (Optional)
- Left Hand 12 - 21mm Chuck (Optional)
- XT-3000 Wheels
- XT-3000 Attachments
- XT-3000 Main Body Spares
- V-391
- E-90
- BK65, SP2500, V291, M5, AP5000, AP5000I Spares
- OK-Vise Clamping
- Mitee-Bite Products
- Fixture Clamps
- Compact Toe Clamps
- Modular Pitbull Clamps
- Dyna-Force® Clamps
- Fixture Clamps
- Gripping Rails
- ID Xpansion Clamps
- Knife Edge Clamps
- Locating Rails
- Long Length Machinable Uniforce Clamps
- Machinable Fixture Clamps
- Machinable Uniforce Clamps
- Pitbull Machinable Clamps
- Multi-Fixture Clamps & Stops
- Pitbull® Clamps
- Series-9 Clamps
- Side-Loc Xpansion Clamp
- Long Length Uniforce® Chanell & Steel Material
- Uniforce® Clamps
- T-Slots
- Vise Jaws & Stops
- Extras
- Aluminium Sub Plates
- Collet Stop
- Collet Wrench
- Mitee-Grip
- Mounting Clamps
- Replacement Parts
- CAM SCREWS
- SLOT WASHERS
- UNIFORCE® WEDGE (SLUG)
- SQUARE WASHERS
- UNIFORCE® CHANNEL & STEEL CHANNEL
- MACHINABLE WASHERS - STEEL (For Machinable Fixture Clamps)
- MACHINABLE UNIFORCE® LOCKING PLATE
- KNIFE EDGE WASHERS
- MACHINABLE UNIFORCE® CHANNEL
- HEX WASHERS
- T-NUTS WITH SET SCREWS
- MACHINING SCREWS (for Machinable Fixture Clamps)
- TAPERED SCREW (for ID Xpansion CLamp)
- DYNA-FORCE
- Vise Pallet
- Fixture Clamps
- Centric Vices - BEST
- Brighetti Reduction Bushes
- Abbott Workholding Products
- Kitagawa
- Autoblok
- Hardinge
- Howa
- Northfield
- Pratt Burnerd
- Leave Fixturing & Clamping Parts
- Auxiliary Parts
- PT01: Smooth Ball End Bolt
- PT02: Serrated Ball End Bolt
- PT03: Knurled Nut
- PT04: Flange Nut
- PT05: Extension Nut
- PT06: T-Slot Nut
- PT07: Clamping Stud
- PT08: T- Slot Nut (Ground)
- PT09: Eyebolt
- PT10: Locating Key
- PT11: Threaded Dowel Pins
- PT12: Jack Screw Tip
- PT13-15: Gripper Nut
- PT16: Swivel Clamping Screw
- PT17: Swivel Shoulder Clamping Screw
- PT18: Gripper Screw
- PT19: Gripper Screw
- PT20: Gripper Pad (Square)
- PT21: Gripper Pad (Round)
- PT22: Spacer
- PT23: 'C' Washer
- PT24: Swing 'C' Washer
- PT25: Spherical Washer
- PT26: Locating Key
- PT27: Locating Key
- PT28: Swivel Joint Support
- PT29: Swivel Pad
- PT30: Lifting Eyebolt
- PT31: Shoulder Bolt
- PT32: Shoulder Dowel Pin
- PT33: Knurled Nut
- PT34: Protection Plug
- PT35: Swiveling Jack Screw
- PT36: Swivelling Jack Screw
- PT37: Swivel Rest Tip
- PT38: Rotary T-Slot Nut
- PT39: Clamp Rest
- PT40: T-Slot Bolt
- PT41: Swivel Flange Nuts
- PT42: T-Slot Nut-Blank
- PT43: Threaded Insert
- PT44: Positioning Bushing
- PT45: Feet (Flat End)
- PT46: Feet (Serrated End)
- PT47: Ball Rollers
- PT48: Ball Rollers
- PT49: Ball Rollers
- Clamp Parts
- CP01: U-Clamp
- CP02: Tapped-Nose Strap
- CP03: Goose Neck Clamp
- CP04: Tapped End U-Clamp
- CP05: Double Ended Clamp
- CP06: Tapped Clamp Strap
- CP07: Slotted End Clamp Strap
- CP08: Swing Clamp
- CP09: Swing Clamp Mount Extension
- CP10: Swing Clamp
- CP11: Free Jaw Vise
- CP12: Adjustable Side Clamp
- CP13: Adjustable Edge Clamp
- CP14: Pivoting Side Clamp
- CP15: Serrated Block Stop
- CP16: Smooth Block Stop
- CP19: Forged Swivel Clamp
- CP20: Forged Swivel Clamp
- CP21: Universal Clamp
- CP22: T-Slot Miniature Clamp
- CP23: Free Vise
- CP24: Eccentric Cam Lock
- CP25: Step Clamp
- CP27: Threaded Goose Neck Clamp
- CP28: Goose Neck Clamp
- CP29: Block Stop
- CP30: Thin Block Stop
- CP31: Clamping Parts
- CP32: Clamping Parts
- CP33: Clamping Parts
- CP34: Block Stop
- CP35: Replacement Hard-Jaw
- CP36: Replacement Hard-Jaw
- CP37: Positioning Edge Support
- CP38: Adjustable Side Clamp
- CP39: Adjustable Side Clamp
- Support Parts
- SU01: Jig Rest Button
- SU02: Offset Jig Rest Button
- SU03: Shoulder Support Cylinder
- SU04: Locating Cylinder
- SU05: Square Adaptor
- SU06: Square Adaptor
- SU07: Square Adaptor
- SU08: Extension Support
- SU09: Extension Support
- SU10: Riser Cylinder
- SU11: Support Jack
- SU12: Positioning Edge Support
- SU13: Positioning Edge Support
- SU14: Split V Block
- SU15: Split V Block
- SU16: V Block
- SU17: V Block
- SU18: Support Jack
- SU19: Adjustable Stop
- SU20: Mini Adjustable Stop
- SU21: Magnetic Support Jack
- SU22: Support Jack
- SU23: Large Magnetic Support Jack
- SU24: Knurled Adjusting Screw
- SU25: Step Block
- SU26: Hardened Ground Parallel
- SU27: Adjustable Parallel Block
- Auxiliary Parts
- Tooling Columns
- Hydraulic Cylinders
- Iemca Bar Feeders
- Eclipse Magnetic Filtration
- ScandMist
- Machine Vises
- Machine Mounts
- NC Rotary Tables
- Deburring Twister Lathe
- Work Gripper
You need to be logged in to view your favourites. Log in here.
Register your email address to receive updates and offers
Create an account- Home
- < Products
- < Mitee-Bite Products
- < Fixture Clamps
- < Pitbull Machinable Clamps
Pitbull Machinable Clamps
The popular Pitbull® fixture clamp is now available in a machinable version. The clamp has positive down force and a very low gripping profile, making it well suited for machining pieces complete in one set up. The Machinable Pitbull® clamp is made of tool steel and heat treated to about 43RC for long life, yet still machinable. There is additional material on the clamping face to allow for machining a radius. It is available in two sizes with 26,000 N. and 50,000 N. of holding force. A dowel pin is included in each package to locate clamp while machining radius.
Tool Steel Machinable
View Tool Steel Machinable
Tool Steel Machinable
View Tool Steel Machinable
You have requested help with...
Pitbull Machinable Clamps
Enter your details below and we'll get back to you.
- Home
- How to Order
- Delivery
- Payment Options
- Security & Privacy
- Terms & Conditions
- About Us
- Contact Us
- Articles
- Sitemap
- Cookie Policy
1st Machine Tool Accessories Limited, 1 The Headlands, Downton, Salisbury, Wiltshire SP5 3JJ, United Kingdom
Telephone: 0800 783 0510 | Fax: 0800 783 0517 | Email: enquiries@1mta.com
© 1st Machine Tool Accessories 2008
Cookie Policy
Cookies are required to enable you to navigate
through this site.They are stored locally on your
computer or mobile devices. For full details of all
cookies used please see our cookie policy
By using this site you are consenting to the use of
cookies.