The Iemca Elite 112 has been developed to be totally innovative in terms of performance, flexibility, and simplicity. The full range of Iemca Barfeeders are also available.
Pricing dependent on exact specification and requirements. Please contact us on 0800 783 0510 or email email@example.com
To respond to the growing needs of the micromechanical market, IEMCA has developed a barfeeder that is totally innovative in terms of performance, flexibility and simplicity. The Elite 112 is able to feed bars of 0.8mm to 12.7mm even on lathes with very high rotation and headstock acceleration speeds without limiting performance in any way.
The Elite 112 boasts a minimum inertia (- 40%) mechanical synchronisation system to ensure precision following of headstocks - even those actuated by linear motors - no matter how small the bars.
Selecting Thin Material
Excellent reliability in selecting thin bars is ensured by a stepping action magazine.
Simple to Use
The Elite 112 does not need any special adjustments to change work or to work with thin bars. This is because the Elite 112 has a library of default configurations pre-programmed into its operator panel.
The innovative double pusher and guide channel design reduces the overall length of the barfeed and make the Iemca barfeed range the most compact on the market.
High Rotational Speeds
The use of closed, calibrated, round section channels and high performance rotation assemblies, plus the development of special low inertia components enable the Elite 112 to function easily with even the fastest spindles.
Fitted with remnant retraction which automatically removes the remnant from the machine and places into an internal bin located in the barfeed.
Bar Clamping Device
Bar introduction/extraction clamps self-centring directly on bar, requiring no adjustment by the operator when changing bar size.
The round section guide channels are fully closed and lubricated and can be completed replaced without tools in less than a few minutes.
Re-tooling time for the Elite 112 is only 4 minutes thanks to the use of quick-fit channels.
Changeover from one material size to another is made simple by the Iemca design features. Changeover times can be as low as a few minutes.
Unless otherwise stated delivery will be made via TNT: