The Iemca Master 80 HF is the ideal barfeeder if you have to change the job more often than once per day, if you have to machine a very wide bar range, or if you are looking for the comfort of a barfeeder that doesn't require any manual adjustment. The full range of Iemca barfeeders are also available.
Pricing dependent on exact specification and requirements. Please contact us on 0800 783 0510 or email firstname.lastname@example.org
Master 80 HF is the ideal barfeeder if you have to change the job more often than once per day, if you have to machine a very wide bar range (ie from 15 to 80mm), including hex and square shapes, or if you are looking for the comfort of a barfeeder that doesn't require any manual adjustment.
The Master 80 HF is the hyperflex barfeeder that allows the changeover in just one minute for each bar between 15 and 80 mm. Thanks to its innovative structure, the Master 80 HF is able to operate in this bar range using just one channel guide.
The magazine adjustment is automatic and the front bushing grants best performances on every job, also if machining hexagonal or square bars.
The Master 80HF bar pusher is heavier compared to the Verso. It is held by means of a mechanical leverage using two pairs of rollers with calibrated diameters. This unique feature, together with the more rigid design, grants the possibility to work using just one channel when machining bars from 15 to 80mm. The Master 80HF is also available in an ‘UP’ and ‘F’ version which offers increased magazine capacity.
Simple to Use
The Iemca barfeed devices design allows for simple set-up for both mechanical and component programming. Iemca devices allow for setting-up a new material size on full length barfeed models to be both quick and easy and can be less than 2 minutes.
The innovative double pusher and guide channel design reduces the overall length of the barfeed and make the Iemca barfeed range the most compact on the market.
High Rotational Speeds
With the addition of extra calibrated pusher supports it allows material up to the maximum size to be rotated at the highest speeds.
Ideal for machining a wide range of material sizes and shapes 15mm to 80mm in just one guide channel set. Additional magazine capacity is available in the Master UP & Master F models.
Fitted with remnant retraction which automatically removes the remnant from the machine and places into an internal bin located in the barfeed.
Bar Clamping Device
Bar introduction/extraction clamps self-centring directly on bar, requiring no adjustment by the operator when changing bar size.
The round section guide channels are fully closed and lubricated and can be completed replaced without tools in less than a few minutes.
Front Bushing Device
The front bushing holder device allows a fast change of the front half-bushings at every working change (less than 30 sec).
The precision design and build of the Master ensure the very highest levels of torsional and longitudinal rigidity, eliminating all vibration.
An extra front support bushing device gives additional guidance and stability to the bar feed for bars that are smaller than the spindle bore.
Axial Shift Device
An axial shift device is offered for access to the rear of the lathe
Changeover from one material size to another is made simple by the Iemca design features. Changeover times can be as low as a few minutes.
Unless otherwise stated delivery will be made via TNT: