The Iemca Master Verso is the ideal barfeeder if you have to work medium to large batches, or if you want to achieve the best performance on every job. The full range of Iemca Barfeeders are also available.
Pricing dependent on exact specification and requirements. Please contact us on 0800 783 0510 or email email@example.com
Master Verso is the ideal barfeeder if you have to work medium to large size batches, or if you want to achieve the best performances on every job, also if machining hexagonal or square bars, but not losing flexibility during the changeover.
The Master Verso is a unique and versatile machine which can work at the highest speed while also offering maximum flexibility in production. ‘The Master 880 Verso barfeed shows it’s versatility in offering to machine a wide range of bar diameters inside the same guide channel configuration and to offer the best bar guidance solution using the snap-in Polyurethane guides. The Master Verso is also available in a larger model to load material up to 102mm diameter and in an ‘UP’ and ‘F’ version which offers increased magazine capacity.
Simple to Use
The Iemca barfeed devices design allows for simple set-up for both mechanical and component programming. Iemca devices allow for setting-up a new material size on full length barfeed models to be both quick and easy and can be less than 2 minutes.
The innovative double pusher and guide channel design reduces the overall length of the barfeed and make the Iemca barfeed range the most compact on the market.
High Rotational Speeds
The closed guide channel along with hydrodynamic support allow for higher rotational speeds.
A versatile barfeed for all types of material shapes offering maximum flexibility in production on round, hexagonal and square material. It allows machining of a range of materials in the same guide channel. Additional magazine capacity is available in the Master UP & Master F models
Fitted with remnant retraction which automatically removes the remnant from the machine and places into an internal bin located in the barfeed.
Bar Clamping Device
Bar introduction/extraction clamps self-centring directly on bar, requiring no adjustment by the operator when changing bar size.
The round section guide channels are fully closed and lubricated and can be completed replaced without tools in less than a few minutes.
Front Bushing Device
The front bushing holder device allows a fast change of the front half-bushings at every working change (less than 30 sec).
An extra front support bushing device gives additional guidance and stability to the bar feed for bars that are smaller than the spindle bore.
Axial Shift Device
An axial shift device is offered for access to the rear of the lathe
Changeover from one material size to another is made simple by the Iemca design features. Changeover times can be as low as a few minutes.
Technical Specification - Master Verso 880
Technical Specification - Master Verso 100
Unless otherwise stated delivery will be made via TNT: