• 0

Not registered? Create an account

Forgotten password

Go to Checkout

More ways to browse

Iemca Next 25

Stockcode: Next 25 | Delivery time: TBC

The Iemca Next 25 is an innovative and unique automation solution designed for multi-spindle lathes combining extremely easy handling with high performance. The full range of Iemca Barfeeders are also available. 

Pricing dependent on exact specification and requirements. Please contact us on 0800 783 0510 or email enquiries@1mta.com


Price: POA

  • Description

    Next 25 is an innovative and unique automation solution designed for multi-spindle lathes combining extremely easy handling with high performance.

    This compact loader handles 3mm to 25mm bars and by using dedicated guide channel sizes on bar stock diameters is rated for up to 10,000 RPM spindles speeds.

    The Next 25 automatically loads the bar into the lathe. Bar stock feeding is then controlled by the lathe using either the feeding fingers or the bar pulling option when available.

    Next 25 has a 220mm linear magazine capacity. Bar selection is completely automatic and diameter set up is quick and simple.

    Bar loading is controlled by Next using a brushless motor driving a worm screw providing both precise feeding and high torque. Bar changeover time could require as little as 6 seconds depending on the lathe cycle.

    Changeover time for each guide channel set is less than 2 minutes thanks to the IEMCA Snap-in system.

    Simple to Use
    The Iemca barfeed devices design allows for simple set-up for both mechanical and component programming. Iemca devices allow for setting-up a new material size on full length barfeed models to be both quick and easy and can be less than 2 minutes.

    Floor Space
    The innovative double pusher and guide channel design reduces the overall length of the barfeed and make the Iemca barfeed range the most compact on the market.

    High Rotational Speeds
    This compact loader handles 3mm to 25mm bars and by using dedicated guide channel sizes on bar stock diameters is rated for up to 10,000 RPM spindles speeds.

    Snap-in Guides
    The round section guide channels are fully closed and lubricated and can be completed replaced without tools in less than a few minutes.

    Greater Flexibility
    Changeover time for each guide channel set is less than 2 minutes thanks to the IEMCA Snap-in system.

    Changeover
    Changeover from one material size to another is made simple by the Iemca design features. Changeover times can be as low as a few minutes.

  • Useful Information

    Technical Specification

    • Max bar dia: 25mm
    • Min bar dia: 3mm
    • Bar Changeover time: 6 secs
    • Range in one channel: N/A
    • Magazine capacity: 300mm
    • Available Lengths (M): 3.1
    • Weight: 600 kgs
    • Operating Voltage: 200-400 Volts
    • Total Power required: 2kW
    • Compressed air: 6 bar
  • Downloads

  • Video


  • Delivery

    Unless otherwise stated delivery will be made via TNT:

    • UK Mainland: TNT standard next day service
    • All Other Areas: TNT standard economy service